NIC-500P for pulseEKKO GPR systems

NIC-500P for pulseEKKO®

The NIC-500P connects pulseEKKO transmitter and receiver pairs to build any configuration system.

• Each NIC-500P will run 2 pairs of pulseEKKO® transmitters and receivers simultaneously.
• The NIC supports any combination of pulseEKKO® antenna frequencies (12.5, 25, 50, 100, 200, 250, 500, 1000 MHz).
• Multiple NICs can be daisy-chained to connect any number of pulseEKKO units

Example NIC-500P Configurations

pulseEKKO Array Systems

Each NIC-500P can run one or two pulseEKKO systems and they can be daisy-chained to run 8 pulseEKKO systems or more.
The examples below show 6-Channel 500 and 100 MHz array systems, but any pulseEKKO frequency can be used: 12.5, 25, 50, 100, 200, 250, 500 or 1000 MHz.

pulseEKKO Multi-frequency Systems

The example below shows six systems from 50 to 1000 MHz, but 12.5 and 25 MHz can also be included.

SPIDAR works best when similar frequencies are connected to the same NIC-500P.

NIC-500P-Compatible pulseEKKO Antennas & Transducers

12.5 MHz Antennas

25 MHz Antennas

50 MHz Antennas

100 MHz Antennas

200 MHz Antennas

250 MHz Transducers

500 MHz Transducers

1000 MHz Transducers