Print
Print
SPIDAR
 Overview   Configurations   Accessories   Gallery  

NIC - Hub Communications Link Cable

The 0.3m SPIDAR link cable connects a NIC to the HUB over a short distance (<0.15m). The link cable can provide power to the NIC from the HUB. Normally this cable is used when the block assembly kit is being deployed.
 
The cable can also be used to link 2 HUBs; however, a longer cable such as the NIC -HUB communications cable is generally used .

The cable is ruggedized and has weather proof Ethernet connectors.

Back to top


1/5/10 m NIC - Hub Communications Cables

This cable connects a SPIDAR HUB to a NIC and provides an Ethernet communications link and power.

The cable is designed for harsh outdoor applications and temperature ranges of -400 to +850C. The connectors are IP67 rated to prevent liquids and other contaminants from affecting the connections.  The cable is shielded and constructed to minimize interference with the GPR signals.
1m long NIC - Hub Communications Cable

This cable can also be used to link 2 SPIDAR HUBs but is NOT designed to power the second HUB or the GPR units attached to that HUB.

Back to top


1/5/10 m NIC/Hub - PC Communications Cables
5 m NIC/Hub - PC Communications Cable

This cable connects a SPIDAR HUB or NIC to a PC using Ethernet communications. 

The NIC/HUB end of the cable is designed for harsh outdoor applications and temperature ranges of -400 to +850C.  The connector is IP67 rated to prevent liquids and other contaminants from affecting the connections. The PC cable end uses a standard Ethernet connector to mate with standard PC sockets. The cable is shielded and constructed to minimize interference with the GPR signals.
 

Back to top


© 2012 Sensors & Software Inc. All Rights Reserved